|
Sat, Sep 20, 08 at 20:55
| When trying to chisel the area on our steel entry door for the plate around the latch bolt I split the little strip of wood beside the drilled hole. How can I repair this to make it strong enough for the new plate. |
Follow-Up Postings:
|
- Posted by shadetree_bob (My Page) on Sun, Sep 21, 08 at 8:59
| Two part epoxy would probably work. If you could give us a picture it would help. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Repair Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.