Return to the Home Repair Forum | Post a Follow-Up

 o
Can anyone identify what this bracket is for

Posted by drmeow3 (My Page) on
Wed, Aug 6, 14 at 17:49

It looks to me like something used to install a glass insert for a door or something like that but the shape seems weird (if the glass is flush with the screwed in part of the bracket, the screw sticks out about 1/2" - if the glass is inset, why does the bracket need to be s-shaped. it doesn't make sense to me).


Follow-Up Postings:

 o
RE: Can anyone identify what this bracket is for

definitely looks like something intended to hold an insert into a recess at the frame / perimeter. the rounded end of the thumbscrew would indicate that it was to bear against glass. Maybe for a mirror. The S-shape os to accommodate different thickness and provide additional tolerance.

That's all I got.


 o
RE: Can anyone identify what this bracket is for

That type of bracket is used in cabinets to hold glass in place from the back side. For example, if you have a china cabinet with many glassed openings in the doors, it's a lot of work to do a recess in the back of the door for each opening and then to cut the individual panes. Instead, a single large piece of glass is cut to cover all the openings and these brackets are screwed in place around the perimeter on the back side of the door to hold the glass in place, butted up to the frame of the door. This type of construction has a definite benefit when it's time to clean the glass. You simply unscrew a couple of brackets; lift out one large piece of glass; clean both sides; and then screw the whole thing back in place. This is much faster and easier than trying to deal with individual small panes that may or may not be removable.

Does that make sense?


 o
RE: Can anyone identify what this bracket is for

Kudzu9 - thank you! I knew because of the rubber tips it was probably for glass. What you described explains the s-shape. It still seems that the rubber tipped anchoring screws would stick out pretty far with this design. I also thought that they were sent (accidentally) with our kitchen cabinets (we didn't have glass doors) which also made me think "glass fronted cabinets". Either way, I'm giving them all to a local place like ReStore


 o
RE: Can anyone identify what this bracket is for

drmeow-
Yes, they can stick out a bit. Looking at it again, I realized that there is nothing to prevent them from being used with recessed glass also, and then they screw in a bit further (to a little more than the position shown in your photo). It's perhaps not the most elegant bracket, but it is traditional and its shape and the length of the screw does allow it to handle a wide range of glass thicknesses and configurations.


 o
RE: Can anyone identify what this bracket is for

Typical on older cabinet doors that had glass inserts. I'm certain you can still buy them. They have the advantage that the glass can easily be removed periodically for a good clean, which is important if there are faux muntin grilles in use, because you really cannot clean around them adequately.
Casey


 o
RE: Can anyone identify what this bracket is for

They're available from Rockler. I'm thinking of using them for my glass front cabs.

Here is a link that might be useful: Glass retainer


 o
RE: Can anyone identify what this bracket is for

Rockler also has another style if you want a lower, cleaner profile. They don't have a screw adjustment, but you get two lengths of rubber tips and you can also flip the clip: the specs say it can handle anything from flush to 1/2" setback....

Here is a link that might be useful: Clips


 o
RE: Can anyone identify what this bracket is for

Thanks kudzu9, I saw that one too. Since I don't plan on removing the glass, it might be the best one for me.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Home Repair Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here