Return to the Home Repair Forum | Post a Follow-Up

Gutter Question

Posted by cciaffone (My Page) on
Wed, Aug 26, 09 at 17:16


We have a short space where two intersecting roof lines
meet and dump a good bit of water on a standard gutter
that is only 12 inches long. Obviously overflows a lot.

So I need to find a gutter-type metal boxish thing
that is no longer than 12 inches, and can be about
8 inches wide and 8 inches deep, with a downspout
outlet in the bottom.

Mostly I am a) looking for what to call such a thing
when looking for it, and 2) where to find such a thing.

All help appreciated.


Follow-Up Postings:

RE: Gutter Question

The easiest thing may be to do a simple drawing and take it to a place that specializes in flashing. They should be able to bend something up for you out of galvanized for a reasonable price.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Home Repair Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here