|
Sat, Jun 20, 09 at 15:23
| Hey guys, I just stumbled on this place and have a question...i seald a slate-top table with three coats of behr wet-look sealer and let it dry for a week...but it scratches right off with a finger nail or if you slide a beer bottle over it...what did I do wrong...or did I use the wrong sealer???Thanks, B |
Follow-Up Postings:
|
| What did the instructions about the in beween coats prep? Did you coat it within 4 hours? Ron |
|
| Dear Ron6519, There is three coats...maybe even a fourth, and the directions say no more than 4 coats...but i cannot guarantee i waited 4 hrs between the first and second...i waited a few day between the thsecond and the third...I used the Behr Wet-Look Sealer, Hi-Gloss No. 985. The table has that beautiful wet look, but no durability...it's been terribly humid and raining since i applied this seal...EVERYDAY...does this help??? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Repair Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.