Return to the Home Repair Forum | Post a Follow-Up

 o
craftsman garage door openers

Posted by denises007 (My Page) on
Tue, Jun 16, 09 at 11:33

We recently installed two garage door openers. One set of remotes work strictly on the one opener however the other set is controlling both openers. Any idea if the 'other' set of remotes needs programmed???or what needs done?


Follow-Up Postings:

 o
RE: craftsman garage door openers

The easiest way to do this is to hold the smart/learn button in on each opener for 6 seconds. This will erase the memory and none of the remotes will work with either opener. Then program the openers again. Do one opener at a time so that you don't end up with this problem again.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Home Repair Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here