Return to the Home Repair Forum | Post a Follow-Up

 o
Garage Door Opener Malfunction

Posted by batman71 (My Page) on
Sun, May 10, 09 at 13:53

Sears opener. Works just fine with the transmitter but will not operate with the wall control.I shorted across the red and white terminals to see if the wall control was the culprit and that did not start it either. Any suggestions?


Follow-Up Postings:

 o
RE: Garage Door Opener Malfunction

I would remove the logic board and follow the circuit from the red and white terminals. Sounds like there may be a break in the trace.


 o
RE: Garage Door Opener Malfunction

Thanks, Don....I'll give thata shot.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Home Repair Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here