|
Fri, May 21, 10 at 3:43
| I have sevral areas of my drive way that have developed pock marks, most are about 1/2 in deep and some are as large as 2 inches in diameter, although most are smaller. Is there any product that can be used to fill these areas that will hold, what about vinyl concrete patch? Any help or suggestions will be greatly appreciated. I tried working pure Portland cement in some of the places but it did not hold. Iggie |
Follow-Up Postings:
|
| try the repair kit at the big 2. folow the directions for cleaning...pure cement won't stick to old cement without some kind of bonding agent. |
|
| Abocrete. Epoxy and sand. Any actual Portland cement product is going to pop off if you have any freezing. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Repair Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.