Return to the Home Repair Forum | Post a Follow-Up

 o
Pre-hung adjustment

Posted by jwangelin (My Page) on
Sun, Mar 23, 14 at 23:05

This weekend I installed a new exterior prehung door on the back of the house. All seemed to go OK, plumb and level. It closes fine but is really hard to open. The rubber sweeps on the bottom of the steel door are rubbing hard. Is there any way of adjusting this?

Thanks in advance,
Jon


Follow-Up Postings:

 o
RE: Pre-hung adjustment

Drive some non-compressive shims under the hinge side jamb without raising the threshold?


 o
RE: Pre-hung adjustment

Is your threshold adjustable--screws spaced equally across the center width? Is the door steel, wood or fiberglass?


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Home Repair Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here