|
Sun, Mar 3, 13 at 17:53
| Does anybody else own the Delta circular sharpening station? I haven't used mine in awhile and found the horizontal circular grinding stone wobbly. Is there a way to flatten it? |
Follow-Up Postings:
|
- Posted by mike_kaiser (My Page) on Sun, Mar 3, 13 at 23:48
| If it's what I'm thinking about it has a high speed vertical wheel and a low speed horizontal "wet" wheel??? The first step would be to figure out why the wheel is wobbling? Is the wheel itself out of true or has something happened to the arbor/spindle that's causing the problem. Is there any motion in the wheel when pressure is applied? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Repair Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.