Return to the Home Repair Forum | Post a Follow-Up

 o
Vinyl Siding J channel repair

Posted by claga (My Page) on
Wed, Feb 5, 14 at 18:59

Hi,
A small 3 inch piece from the front edge of J channel that meets the riser/kick plate under the patio door broke off while I was shoveling snow from the deck.
Can it be glued back on?
If so what is the recommended adhesive?

Thanks


Follow-Up Postings:

 o
RE: Vinyl Siding J channel repair

I would silicone a piece of vinyl or plastic to the back of the channel which spanned both sides.


 o
RE: Vinyl Siding J channel repair

thank you for your response.
how many mils. thick would you recommend for the vinyl or plastic back piece?


 o
RE: Vinyl Siding J channel repair

I have no idea. Thick enough that if you bend it repeatedly, it doesn't break right away.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Home Repair Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here