|
Sat, Jan 28, 12 at 16:57
| I have an older 1/3 hp Craftman (139.53200)garage door opener that did not come with safety sensors (although they were available as an option:pt#G53710 no longer available) I also have a newer 1/2 hp unit (139.53628SRT) with sensors (pt#41A4373)that are still available for purchace.
Is it possible to wire these sensors to the older units and have them work successfully? If so, how? Or are there other sensor available that will work with the older units? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jan 30, 12 at 10:04
| There is no way to add sensors to your old opener. The option available at the time it was new included a logic board. The logic board in your opener will not accept sensors. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Home Repair Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.