Return to the Home Repair Forum | Post a Follow-Up

programing Garage door Opener

Posted by gailiz (My Page) on
Mon, Jan 5, 09 at 10:14

How do I program my Garage Door opener

Craftsman Model #139.18760

Follow-Up Postings:

RE: programing Garage door Opener

Locate the smart/learn button on the rear of the motor unit near where all those white wires go. While holding the button on the remote press and immediately release the smart/learn button. Do this for all your remotes. If you have a wireless keypad you need to press and immediately release the smart/learn button and then walk over and key in your 4 digit code and press enter.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Home Repair Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here