|
Sat, Nov 5, 11 at 9:30
| Hi, We've been undergoing a major remodeling our home. We had an Electrolux that has worked well for many years (and was still working). The house is set up for 2 central vacs (one in the original house and a second for the addition). With the addition the electrician pushed for a NuTone central vac over the Electrolux. The rough in and outlets for both old and new were done for the NuTone brand. So far, we don't even have a unit, but attached the inlet plates and are not happy with the quality. It is an electrified unit, CI390 and the cover plate doesn't close well.
Is it possible to jump ship and go to a different central vac system by just changing the inlets? We haven't yet purchased the NuTone so aren't committed yet, and the electrician is no longer on the job. Along that thought are there other brands we should consider? Thanks for your help. |
Follow-Up Postings:
|
| By all means you can still make changes. The brand of outlets rare affect the brand of the unit. I've been very satisfied working with Central Vac in Florida. They recommended Imperium (sp?) which is a Canadian brand. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Remodeling Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.