Return to the Remodeling Forum | Post a Follow-Up

Adapter for freestanding stove for slide-in

Posted by badabing2 (My Page) on
Fri, May 17, 13 at 11:12

Want to replace my slide-in stove with a freestanding model. Is there any "adapter" to fill in the gaps? Or any ideas how to make one? The granite is uneven and not square. Seems like there's a simple solution to this dilemma but not finding it.


Follow-Up Postings:

RE: Adapter for freestanding stove for slide-in

You don't need any adapter. Just remove the old stove and the new one fits in place. They should both be a standard 30". As long as there is no countertop strip at the back that is. If there is a strip of counter at the back, then you need a contractor to remove it and the stove slides right into place.

RE: Adapter for freestanding stove for slide-in

This is correct - a slide-in will fit as is (though I will need to fix that strip at the back). In my case the gap is very uneven so really want to fill in the sides for aesthetics. I did find this one site that makes filler trim (link below) but looks like a custom order. Seems like a common problem so baffled why a simple trim filler isn't easy to find.

Here is a link that might be useful: Microtrim

RE: Adapter for freestanding stove for slide-in

There are a couple of options.
If, and/or when you have a clean opening you can have the edges squared and polished, squared and a trim piece of granite added or squared and a piece of polished stainless or aluminum "T" metal added.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Remodeling Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here