|
Thu, Feb 11, 10 at 9:59
| The bathrooms have tile in the shower up to the ceiling. There was no crown molding in there before. I thought it would help update the rooms. Does the molding stop at the tile, or go over it, to surround the rooms? |
Follow-Up Postings:
|
| C.M. on tile would look weird to me. I assume you only have tile to the ceiling at the shower stall, so it should still look good by stopping at the tile and cutting a bevel to come down to the wall. Either use the plastic molding or very carefully seal all sides of wood molding prior to installation and seal the interphases with ceiling and wall with caulk to prevent water infiltration behind. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Remodeling Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.