|
Tue, Sep 27, 11 at 12:33
| Advertised to sharpen blades with every cut.
SharonG/FL |
Here is a link that might be useful: Pat Sloan's Cutting Edge Notions
Follow-Up Postings:
|
| No. They are interesting but a bit expensive. If they work it might be worth it. |
|
- Posted by geezerfolks (My Page) on Tue, Sep 27, 11 at 15:53
| I like the 6.5 x 12.5 size.....but, it costs an extra $8.55 for postage. Oh well, just a thought. Wonder where they're shipping from.....can't cost that much! SharonG/FL |
|
| I have heard they don't work very well. Didn't want to spend the money just to find out they were right. beverly |
|
| If they worked I would buy one! I hate dull cutters. But it does sound too good to be true. |
|
- Posted by geezerfolks (My Page) on Wed, Sep 28, 11 at 9:47
| If I can remember, I want to check at the LQS to see if they have them. Might get a small one for a test drive. But, I also like how clear the lines and numbers are. SharonG/FL |
|
- Posted by sunnycentralfl (My Page) on Thu, Sep 29, 11 at 15:37
| Yes, I saw one that was used in a shop in BlueRidge, Ga. The shop owner said it fell apart and the ridge that was supposed to sharpen just came unattached. I did not get one at the quilt show I attended, thank goodness. They are costly! Gwen |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Quilting Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.