|
Tue, Dec 1, 09 at 20:01
| what do I use? |
Follow-Up Postings:
|
| The contractor put in the wrong spacing underneath and now I have to redo it The srew holes need to be filled in, but what will work? Any suggestions from someone who has experience with this? |
|
| Remove the board and cut off the section with the holes, going back a ways, and replace that section with a new board. The new board won't match right away because the sun needs to "cure" the material, for lack of a better word. With time it should match unless you get into a diff lot color variation, but I guess that's better than holes. Was this contractor recommended by someone? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Porches & Decks Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.