|
Sun, Oct 18, 09 at 0:35
| I am face screwsing my ipe boards with #8 Stainless Steel fasetners , countersynching and predrilling all of them. I am putting two screws on each joist 1/2" from the sides. Is this too close to the edge is there a recommend space they should be set. |
Follow-Up Postings:
|
- Posted by john_hyatt (My Page) on Sun, Oct 18, 09 at 10:01
| Sounds about right to me. J. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Porches & Decks Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.