Return to the Porches & Decks Forum | Post a Follow-Up

 o
Moisture Shield (AERT) Advice

Posted by kate_a (My Page) on
Wed, Jul 13, 11 at 14:56

We had a beautiful (at least for 3 months) Radiance Wood deck installed last summer. By mid-winter the boards had warped, split & begun seperating from the foundation. All the decking has to be removed. We now can replace the decking with the Radiance Wood & cross our fingers or use a composite product called Moisture Shield. Since the previous materials went so terribly wrong I am seeking any advice I can find on the Moisture Shield product. Our contractor has not worked with it before & I don't want to go down another dark road if I can avoid it. Thanks in advance for any insight you can provide.


Follow-Up Postings:

 o
RE: Moisture Shield (AERT) Advice

Sorry about the radiance material I had high hopes for that stuff. Question.. did you use 3/4 '' decking ? Anyway I did not want to be the first to try it thanks for the feedback. I defentley would not go with it again, well mabey if you put on 3/4 before and went back with the 1 1/2''.

Moisture Shield is quality manmade product. I have been to the plant, put it down a fair amount,and have seen it 10 years down the road. Not Bad At All and I am not a manmade fan.

MS us real big on quality control and R&D. Example >>> the dreaded trex hits the board right out of the extruder with water on the truck in 15 min. Moisture Shield cools down the board for 7 hrs naturaly <<<

JonMon www.deckmastersllc.com


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Porches & Decks Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here