|
Sat, Jul 25, 09 at 10:09
| I need to replace one panel of lattice and I can not find the size I need. The home improvement stores here (Lowes, Home Depo, Menards all carry two sizes, one is a larger hole in it, about 3-4 inches or so and one is a very small hole, about an inch or less.
I need it to be 1 3/8 or 2 inches (depending on which way I measure it) The gazebo I am repairing was built about 35 years ago or so. Where can I go to get what I need? Thanks in advance for any info you can give me! ~Sunny |
Follow-Up Postings:
|
- Posted by brooklyndecks (My Page) on Sat, Jul 25, 09 at 18:18
| When I need something like that, I go to my shop, and build it. steve |
|
| sunny, Steve's implying, gotta have a table saw to make the lattice. Either you get a cheapo TS, or find somebody who already has one. After you get that done, everything else will become obvious. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Porches & Decks Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.