|
Sun, Jun 6, 10 at 15:02
| Joe,
Congratulations for being featured in the may/june edition of Deck Builder magazine. That canyon hangout job is a beauty. Sweet jobsite, but probably not an easy one to work in...lots of steps. You're very talented dude. steve |
Follow-Up Postings:
|
- Posted by john_hyatt (My Page) on Mon, Jun 7, 10 at 7:42
| X 2 . Hey Joe!! A few weeks ago I found out Garapa steam bends really well. I used some 1/4'' x 5'' rips on a S curve bench with a pre form and a steam iron. Garapa is made for Laminatets you might want to check it out on the next one. J. |
|
| I haven't seen the issue yet, but will have to check it out. Congrats getting featured in the deck builder magazine. Al |
|
- Posted by sierraeast (My Page) on Tue, Jun 8, 10 at 12:41
| Here's the article. Awesome project wood + masonry! |
Here is a link that might be useful: deck builder article-joe wood
|
| Thanks Guys :-) That as a fun one to build too! Here it is on my website http://woodsshop.com/PROJECTS/Curved-Hillside-Deck/Curved_Hillside-Dec
k.htm I'm pretty stoked, going to be doing another very similar but 3 times the size :-) |
Here is a link that might be useful: canyon deck
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Porches & Decks Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.