Return to the Porches & Decks Forum | Post a Follow-Up

 o
Installing pavers over existing hard surfaces

Posted by phg101 (My Page) on
Tue, May 4, 10 at 0:00

We have a 350-sq-ft entry patio space that is currently: part bricks, part concrete, and part stamped concrete. We'd like to re-do the whole space to make it look cohesive with one surface treatment, such as concrete pavers. The question is: can we install the pavers by applying the sand layer over the existing hard scape surfaces and then install the new pavers? Or do we need to dig up the current bricks, concrete, and stamped concrete? Note: the existing surface already has an appropriate slope for drainage, and we live in sunny (usually) San Diego (zone 8).


Follow-Up Postings:

 o
RE: Installing pavers over existing hard surfaces

you can go over the concrete. If its flat, you may be able to lay it down without sand and "glue" down the edge pieces


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Porches & Decks Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here