Sorry in advance, can't figure out how to get links to import pictures. here is a link to the photobucket album:

http://s753.photobucket.com/albums/xx175/mike_balt/Deck/

I built a pressure treated Deck in Sept 08. left it bare till 7/09. Then stained it with Cabot's oil base solid decking stain. 1 coat on verticals, 2 on horizontals.

Here's the deck (not near ground)

http://i753.photobucket.com/albums/xx175/mike_balt/Deck/0428001846.jpg

By September 09 I noticed mold growing on the upper surface:

http://i753.photobucket.com/albums/xx175/mike_balt/Deck/1010091836.jpg

I used a Bear anti mold product on it and it cut the surface mold considerably.

After this winter, I'm noticing the stain peeling on the surface and a lot of mold underneath the deck:

here are some specific shots:

http://i753.photobucket.com/albums/xx175/mike_balt/Deck/0428001845a.jpg

http://i753.photobucket.com/albums/xx175/mike_balt/Deck/0428001845b.jpg

http://i753.photobucket.com/albums/xx175/mike_balt/Deck/0428001848.jpg

Looking for advice on stopping mold and repairing surface. What do I wash/scrub the mold with?

What do I do with the surface? Rent a floor sander and use a coarse grit?

Thought's appreciated.

Thanks

Michael