Return to the Porches & Decks Forum | Post a Follow-Up

Safety and durability of aluminum vs. wrought iron railing?

Posted by infohound2006 (My Page) on
Wed, Feb 10, 10 at 21:05

Are there any safety issues with Aluminum railing vs. wrought iron / stainless steel (are those different)?

Our landscape architect's deck guy had said that the one Aluminum railing he'd built had flex in it that a steel one wouldn't. So, "to keep us safe", the architect is recommending the wrought iron one for the stairs and landing going up to our front door.

What's the real story?

I do like the more modern look of powder-coated metal.
And I'm also drawn to aluminum rather than a metal that'll eventually rust, flake, and have to be stripped and repainted. (besides which, the estimate was $1,000 more for wrought iron).


PS. Will powder-coating be enough, or should we be spec'ing something like anodized aluminum underneath, or another coating? I have been assuming the powder-coating is more durable, but we do have a rainy season here in N. California. (At least that's the rumor; not much evidence of a rainy season in the last 4 years).

Follow-Up Postings:

RE: Safety and durability of aluminum vs. wrought iron railing?

My experience says wrought iron will eventually rust unless repainted. I have powder-coated aluminum patio furniture which looks the same as day one after 4 years. If built correctly there's no reason alum can't be rigid.

RE: Safety and durability of aluminum vs. wrought iron railing?

It all depends on the install/product far as flex goes.

The quality of finish is key when using steel handrail systems with outside projects.

These guys have alum and steel products that,when installed corectley, will both last a very long time and have little flex.

The price installing a rail system like this is way over your basic box store. J.

RE: Safety and durability of aluminum vs. wrought iron railing?

It is not wrought iron. It is steel railing. Wrought iron is fibrous and last for hundreds of years with low rust. In the Carolinas steel custom railing is less expensive than aluminum railing. I don't like the powder coated railing. Inevitably the paint will chip and it somewhat ugly to repair.

RE: Safety and durability of aluminum vs. wrought iron railing?

We found a company called RailingWorks that pre-fabricates the powder-coated aluminum railing for a quite reasonable price. Ships it as a "kit" with pieces, connectors, etc. And, because it's aluminum rather than steel, the freight charge is not ridiculous. It's not custom-welded, but if well-measured looks like it'll be easy to attach and look good.

Does anyone have experiences with them? If they're OK, we're planning to order from them next week.

RE: Safety and durability of aluminum vs. wrought iron railing?

Around 5 years ago, I installed some shade sails in my back yard. I already had some carbon steel pipe so I decided to use that for the supports. I wire brushed away the loose rust and primed them with Rust-stop primer. then painted them with flat black paint. They still look wonderful today! I am getting ready to do some steel handrails around my new deck and plan to paint them with the same stuff. If that Rust-stop primer worked that well on rusty pipe, I can't imagine how nicely it will work on new steel. I am not a fan of powder-coating. It is impossible to touch-up if rust does pop through.

RE: Safety and durability of aluminum vs. wrought iron railing?

I recently wrote an article called "Maintenance Free - Aluminum Fence compared with Steel and Iron", comparing Aluminum with Steel and Iron fence. Iron and Steel are definitely stronger when it comes to resistance to denting and bending, but Aluminum - especially when coated - will hold up better to the weather without regular maintenance.

Aluminum railings

Info hound, did you buy from railing works? Was is a good choice?

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Porches & Decks Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here