|
Wed, Oct 19, 11 at 21:06
| I'm sure this has been covered before, but I can't seem to find exactly what I'm looking for. My polaris 280 isn't working right. It acts like it wants to float a little, goes pretty much in a clockwise circle, and the tail doesn't have a whipping action. Any ideas? |
Follow-Up Postings:
|
| Sounds like the back jet is pointed up and the float is a little too close to the body and the tail flow screw is closed. Straighten the jet and loosen the tail flow screw a 1/2 turn. It should gently move the tail side to side. Loosen 1/4 turn there after until the desired action is found. Pull the float about a 1/2" back. Scott |
|
- Posted by travis_turner (My Page) on Thu, Oct 20, 11 at 19:09
| Thanks. The problem was non-product related. Aka...I'm an idiot. Travis |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.