Return to the Pools & Spas Forum | Post a Follow-Up

AquaPure 1400 Sensor Replacement

Posted by trainthewoods (My Page) on
Thu, Sep 20, 12 at 22:48

I recently replaced my AquaPure 1400 Sensor & am having some issues with it communicating with my PDA.

If I put it in service mode from the J-box, everything works fine; but if I try to control it from the PDA I don't get a water temp or salinity reading on the PDA & it doesn't indicate that the AquaPure is running under "Equipment Status".

Any suggestions? Thanks in advance!

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Pools & Spas Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here