|
| Hello All,
We are scheduled to have our 15,500 gallon vinyl pool closed this week and I have a couple of questions. 1: Should I keep the pool as clean as possible until the closing, or can I let it sit for the next week or so? 2: What is the process for winterizing the LED light? I have a Fusion brand LED and there is apparently a winterizing plug designed especially for it. I don't have it, and the original PB and I no longer communicate. Would any 1.5" plug work? Any other suggestions or comments are welcome! Thanks!!! |
Follow-Up Postings:
|
| Where are you. Some places have deep frost lines, others don't. Scott |
|
- Posted by Speckledhen (My Page) on Mon, Sep 24, 12 at 8:22
| Oooops! I guess my location does matter:-) I am in North Jersey. Thanks again everyone! |
|
| The LED light should be fine left alone as it is below the frost line. Spring start up will be easier but is not required. Scott |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.