Return to the Pools & Spas Forum | Post a Follow-Up

 o
Salt Water pool chlorine generator not working

Posted by WallyMo (My Page) on
Sun, Aug 10, 14 at 22:53

I have a salt water pool with an Aquarite chlorine generator. It generates for a few hours, then stops with all the display lights coming on, including high salt and inspect cell. I shut the system off for a few minutes, then on again, and it works just fine for a while, then it stops generating and all the lights come on. I have recently cleaned the cell according to instructions. The limiter on the pcb gets very hot just before the system shuts off. Can't figure out why this is happening. Don't want to have to buy a new pcb. Any ideas why this is happening?


Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Pools & Spas Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here