Return to the Pools & Spas Forum | Post a Follow-Up

 o
Hot Tup re-wiring?

Posted by ajbolit (My Page) on
Sun, Jul 27, 14 at 22:10

We just removed our old inground hot tub that was wired with two 30 Amps and one 20 Amps cables (each has 2 hot and 1 "ground" wires). We would like to get new "outside" type hot tub . The problem is - our unit located on the 3rd floor and current wires were placed through the holes drilled in joists back in the 80's. I dont see how can we put new 50 Amp cable since the floor is finished.
Apparently I can do it with HotSprings model Hot Tubs that are being powered by 2 cables - 30 and 20 Amps - any other manufacturer would allow me to do it? Can I some how convert 80 Amp in 3 separate cables to 1 cable with 50-80 Amp rating?


Follow-Up Postings:

 o
RE: Hot Tup re-wiring?

not without bringing a new cable to the hot tub from the panel


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Pools & Spas Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here