|
Sat, Jul 16, 11 at 16:05
| I have a Aqua Logic pool system. Just recently I have received an error code that is from the control board reading zeros for the amps and zeros for the salt content as well. I still have a reading for the volts going to the cell. I was wondering if there is a fix for this besides replacing the expensive control board. Any help would be greatly appreciated.
On another note, I have flagstone around my pool and spa as well that seems to be deteriorating from the salt water. Is there any sort of sealer that will stop this from happening or am I just going to have to replace it in a few years? |
Follow-Up Postings:
|
| See www.nocellpower.com . This is not an unheard of event as the site will show you. Scott |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.