Return to the Pools & Spas Forum
| Post a Follow-Up
New Pool Pics - Atlanta, GA
| | |
Posted by
jutt (
My Page) on
Wed, Jul 25, 12 at 11:29
| I got a ton of information from this site when I was building my pool so I thouhgt I would share a few pics of completed project.
17x36
8 ft Spa
Salt System
Stamped Concrete
Flagstone coping and stepping stones
Hayward Equipment
Automation System w/ Aquapod Remote
Let me know if you have any questions? |
Follow-Up Postings:
RE: New Pool Pics - Atlanta, GA
| | |
RE: New Pool Pics - Atlanta, GA
| | |
RE: New Pool Pics - Atlanta, GA
| | |
RE: New Pool Pics - Atlanta, GA
| | |
RE: New Pool Pics - Atlanta, GA
| | |
RE: New Pool Pics - Atlanta, GA
| | |
RE: New Pool Pics - Atlanta, GA
| | |
| Nice looking pool. Question about the TV... Is that something you bring out to watch, then bring back inside when you are done? Or do you have some sort of waterproofing? We got a projector with plans to project onto something while in the pool, but don't yet have something good to project on that works when it is not night time... |
RE: New Pool Pics - Atlanta, GA
| | |
| I take the tv in and out and plug into ground fault receptical and coax connector which are also on a switch on my remote for extra caution due to proximity to water. I have seen a rear projector mounted under a deck and shot onto screen that lowered from deck. Good idea if your setup allows. |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in.
If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.