Return to the Pools & Spas Forum | Post a Follow-Up

 o
Pool stairs advice

Posted by robinst (My Page) on
Sun, Jun 5, 11 at 13:34

We moved into an older home that we have been remodeling over the last couple of years. We discovered after we moved in that the previous owners had poured the stamped concrete over the original concrete. While this is frustrating, the concrete is still in pretty good shape and we don't want to replace it. The new concrete, however, raised the elevation of the concrete around the pool, making the step down to the first step a little over a foot. The steps were also covered in a liner that was pulled out from the wall - almost like it was too tight. The steps were attached to the steel wall and are fiberglass - wedding cake style. We are not sure why the previous owners covered the steps with the liner - their may have been a leak but there are no notable cracks in them.

We are looking at options for the pool and were quoted an option to tear out part of the concrete and put in new steps, which would also require all the coping to be replaced and 6 inches of concrete around the perimeter.

I am thinking it is pretty extreme to fix an issue of a few inches in the steps. Does anyone know of other ways to replace stairs within the pool?


Follow-Up Postings:

 o
RE: Pool stairs advice

This may give you a better Idea of what you have or maybe what you want. Liner over steps is very common. To change the steps will require a new liner.

Here is a link that might be useful: Steps


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Pools & Spas Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here