|
Sat, May 14, 11 at 11:43
| Hi-I haven't been on for awhile but I hope someone can help. My aquarite generator appears to have stopped working. LEDs are all properly lit but there was hardly no chlorine in the pool. When I went through the diognostics everything appeared fine except "cell output" which is reading 0.00 The cell is less than a year old but i don't have a receipt for it (replacement by pool builder/friend) Could it possibly be something in the panel? Of course customer service is closed on the weekend. |
Follow-Up Postings:
|
| Meant to say "cell Current" But I turned everything off and turned everything back on and it seems to be working now-go figure. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.