|
Sun, Apr 3, 11 at 16:00
| Hi - I am going to upgrade the lighting in our pool to Pentair's Intellibrite. Currently, the spa and pool light are both the same size. I would prefer to have the smaller spa light in the spa. Is there a way to convert the fixture from being the larger "pool size" to a small "spa size" fixture.
Thanks,
|
Follow-Up Postings:
|
| Can it be done? Yes but it will cost you quite a bit as there are structural changes needed. The gunite surrounding the old niche is going to get chipped out and replaced with the new niche, the power cord conduit to the deck box will need to be changed, and the plaster redone. Each of these may have added challenges too! Scott |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.