|
Tue, Mar 30, 10 at 14:55
| I have an Aquarite SG that is 3yrs old. None of the lights on the board come on but there is a salt reading of 3000 and the diagnostics work. I ran it through the diagnostics with the factory 800 number and they told me it was a problem with the board. After searching the web and this site I saw that there were issues with Aqua logic by Goldline with solder issues and would like to know if this could possibly be my problem. Thanks Scott |
Follow-Up Postings:
|
|
- Posted by jern(jern_a5@hotmail.com) onMon, Jun 13, 11 at 5:06
| I have this problem too. I am the user from Thailand. The light does not work. The thailand distributor said i need to buy a new board. The warranty only cover a year. Mine is just over only 1 year old. I've ask if they could provide warranty for new board they said they can not because howard the distributor does not do it. |
|
- Posted by muddy_water (My Page) on Mon, Jun 13, 11 at 6:07
| Check both fuses on the board first |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.