|
| 3 month old pool with surface delaminations, about 20 or 30, all rough and about 1/16" deep.
This thread started in the old "I will answer Pool Plaster Questions" thread. Rick is wondering the cause and expected repair. The pool is in Ok and is not winterized. Here is a quote from his original post: "Hello, we have a 3 month old gunite/quartz plaster pool that has developed 20-30 delamination spots n the deep end. Can you tell me what the options are for repair? What should I expect/demand from the pool builder. It is a 16k gallon located in Oklahoma. Thanks so much,
Scott |
Follow-Up Postings:
|
| Additional info. The spots are near the base of the bowl. Comments are appreciated. Scott |
Here is a link that might be useful: Interesting read from PoolHelp.Com
|
| bump |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.