Return to the Pools & Spas Forum | Post a Follow-Up

Pump Recommendations Please

Posted by auggie1020 (My Page) on
Sat, Feb 1, 14 at 8:05

I have a 25,000 gallon pool, DE Filter (I think it is a Purex Triton FNS 36) and use a polaris 360 (no booster pump). Currently have a Hayward Super pump 2HP, which with the frigid temps in Atlanta the last few weeks has been running alot with the freeze protection and it has started to whine VERY LOUDLY. My suspicion is that it is going. Not sure how old it is but I think it is 10 years old. I am wondering if it is worth trying to find out why the whine or should I just go ahead and replace it. If I replace it, I am curious as to how variable speed pumps work and if anyone has knowledge about what it costs to run a very efficient variable speed pump vs. just swapping out with another Super Pump? Any recommendations? Thanks.

Follow-Up Postings:

RE: Pump Recommendations Please

Hello Auggie1020, Let me start out by saying you have a little time left on your current pump before the bearings seize up and burn out the motor. I am a pool professional of 10 + years in many different pool stores so I know what I am talking about. Now since you have a super 2 right now I would probably stick with Hayward a good variable speed of theirs is the eco star. That pump saves you up to $1200 bucks a year on your electric bill because of the different settings you can personally set to change the RPMs. The reason it is saving you the money is because the variable speed pump uses a number of magnets to rotate the shaft of the motor as opposed to the single speed motor that uses a series of bearings. The magnets in the variable speed pumps don't ever touch each other. The bearings in a single speed grind together which causes more strain for the motor to turn the shaft which in turn uses more electric. what you are hearing now is the bearings grinding together because they are rusted out due to the seal failing. The Eco star also has a built in internal fan that cool the motor whenever it is on which means its always pretty cool to the touch. If you notice if you try to touch your motor now after its been running or while its running you might burn your fingers. Most variable speed pumps are top of the line between the $800-1000 dollar area a new single spend motor is about $250-350 bucks. As far as running a single spend here in AZ we half to run our motors longer because of the dry heat but here a person would be paying about $130 bucks a month to run a single speed 8-10 hrs
A variable speed is about $30 bucks a month to run 8-10 hrs it is a huge money saver. So bottom line from experience a variable speed is the way to go saves you money and its a lot less hassle down the road in my experience.

RE: Pump Recommendations Please

Thanks Aaron. Very helpful. What I don't understand though is how can the variable speed pumps pump as much water when the are operating at such lower speeds. Wouldn't the amount of water moved equal the rpms?
I guess will scope out the replacement pump and buy it when this one goes, although it almost makes sense to just replace it as it would pay for itself in a year or 2.

RE: Pump Recommendations Please

The Rpms are adjustable to regulate the flow of water for certain things the higher RPMs would be used for water falls , pop up heads that kind of thing the lower rpms are used for just circulation. Even running a variable speed at higher rpms for 8-10 hrs its very low cost to run. The variable speed does pay for it self within a year or so of using it.

RE: Pump Recommendations Please

Definitely replace with a variable speed pump! it will save energy in doing so

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Pools & Spas Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here