|
Sun, Jan 30, 11 at 23:56
| Had an IG vinyl steel walled pool installed in MA last fall and decided to wait until spring to lay our decking. We are considering going the paver route with a cantilever edge. My better half is not too fond of the the bullnosed edged pavers she's seen used for coping. She feels it presents too much of a border around the pool which is a look she would like to avoid. She has picked out a slab paver(Techo-Bloc Blu 60) for our decking, and I am wondering if its possible to just use the pavers as coping by laying them right up to the edge. Any comments/suggestions/opinions would be much appreciated. Thanks.
here a couple pics the top of our pool walls
|
Follow-Up Postings:
|
| Hi MX702, we're in MA and doing the fall/spring build too. We're going with tecnobloc blu pavers and matching bullnose coping. I've seen some pools with similar set up and it looks great. search "southern NH pool build" on here and you'll see CNR's pool which is beautiful and uses the blu pavers/coping. Good luck! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.