|
Tue, Nov 29, 05 at 21:24
| Anybody have any idea where I might install a swg in the future with this setup?
Builder wants 2800.00 now to install, so I ask for the "rough in" for the Aquapure SWG. It does not look to me like there is enough room to install in the recommended configuration. Any thoughts / help. Thanks for your thoughts Eric |
Image link: Help with plumping (40 k)
Follow-Up Postings:
|
- Posted by huskyrider (kelly@atlantispool.com) on Mon, Dec 5, 05 at 8:40
| I'd place it on the return pipe going between the filter and the heater. This is the normal spot and the installation will be a snap. I'm sorry to hear that your builder is trying to hose you for 1000 more than the fair market value of an after the fact installation. Perhaps you should consider waiting until after turnover and doing it yourself or with the assistance of a mechanically inclined friend. Or if your in the greater Houston area call me. See Ya, |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Pools & Spas Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.