|
| Hi there, I'm trying to plan my well water treatment. I have high iron at 15ppm and hardness is at 31.7ppm. I've read that anything under 3gpg doesn't necessarily require softening so I'd like to only filter the iron if possible and avoid the use of a softening system as well. One company I spoke to(waterboss) said I had to use a softener in conjunction with their iron filter as it let 10% pass through and the softener was needed to get that. Is this true of all iron filters and does anyone out there have a similar composition to mine that are using only an iron filter. Thanks |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.