Return to the Plumbing Forum | Post a Follow-Up

 o
Can I cap my shower pipe?

Posted by reel_life (My Page) on
Tue, Dec 6, 11 at 18:01

Hi! I'm taking out my tub/shower combination and replacing it with a shower only, with just one showerhead, a handheld on a slide bar. I was planning it this way to save money on plumbing, so I wouldn't have to switch out my valve. I'd like to have the supply elbow come out at the place where the tub faucet is now.
However, since my water will only need to come out at one place (the supply elbow), and currently water comes out at two places (tub faucet and shower head), am I going to have to change out or otherwise adjust the valve anyway to turn off one of those outlets?

Any thoughts you can give me on this matter are much appreciated.


Follow-Up Postings:

 o
RE: Can I cap my shower pipe?

I just screwed a piece of pipe with a cap on it into the unused opening.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Plumbing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here