|
Sun, Nov 28, 10 at 17:24
| My DH and I are just coming up on the end of our DIY kitchen renovation. We turned the faucet on for the first time and the faucet came unseated and it does it everytime we put the water on. When we turn the water off, it drips. It's brand new, should we just take it back and exchange it?
I"m honestly not sure I'd exchange it for another one. My DH is a mechanical engineer and I bothered him about making sure it was installed correctly before coming here. He just has no idea what the problem could be and is really upset I spent so much on a faucet that is performing terribly out of the box. |
Follow-Up Postings:
|
| I did contact Grohe about this, the head will probably drip and they just re-stated the spring installation for the head problem. Not helpful at all. I'm concerned about their lack of customer service enough that I'm going to return it. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.