|
Wed, Nov 9, 11 at 17:01
| I'm looking to replace the flapper valve and fill valves
on two different ELJER tanks. The model numbers look like 2574 and 2562. However, when I called Eljer (American Standard). I was told that the model number should be seven digits long! All I see are four digits, preceded by a date stamp. The year was 1996. I'm looking at the inside rear wall. Is there any other place I should be looking? The name "Eljer" is printed on the lid of one tank. Is it possible that the lid is for an Eljer tank, but my tank is not Eljer? I'm the original owner of thge house.
|
Follow-Up Postings:
|
- Posted by lazypup (lazypup@yahoo.com) on Thu, Nov 10, 11 at 7:22
| Unless you have a very rare eljer you don't need the tank number, You can use a universal fit generic such as those made by Fluidmaster |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.