plumb washer & laundry sink into existing stack **photos included

Posted by jaysgarden (My Page) on

Tue, Oct 25, 11 at 13:57

Want to install a laundry sink and washer as shown in the photo.
My thoughts are to

1.Install a 4 x 4 x 2 T-Wye lower than the existing clean-out on the stack.

2.Run 2" horizontally to a 2" T-Wye.

3.Out of the branch of this T-Wye go verticaly up to a San-T for the laundry sink.

4. Out of the San-T in step 3 the branch gets the stub out for the trap adaptor and the run goes up to tie into venting.

5. Out of the run in the 2" T-Wye in step #2, run 2" to a 2" P-Trap for the washimg machine standpipe.

Check out photos and let me know your comments or a better way

http://s1121.photobucket.com/albums/l511/jayherenow/baselaundryroughin /

Follow-Up Postings:

Are there any fixtures draining into the stack above the garage drains or is that just a vent? Also, are the garage drains just floor drains?

Please Note: Only registered members are able to post messages to this forum.

If you are a member, please log in.

If you aren't yet a member, join now!

Instructions

You must be a registered member and logged in to post messages on our forums.
Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
After posting your message, you may need to refresh the forum page in order to see it.
It is illegal to post copyrighted material without the owner's consent.
HTML codes are allowed in the message field only.
No advertising is allowed in any of the forums.
If you would like to practice posting or uploading photos, please visit our Test forum.
If you need assistance, please Contact Us and we will be happy to help.

Click here to learn more about in-text links on this page.