Return to the Plumbing Forum | Post a Follow-Up

 o
Warm/cold Water Isuue

Posted by Ryanak1200 (My Page) on
Fri, Oct 7, 11 at 6:47

We have a single lever Moen faucet in the kitchen. We recently unclogged the warm water line, solving that issue only to have a new issue develop. Now when we turn the lever for cold water it slowly warms up. This is the only faucet where this happens. If we shut off the hot water line we get cold water again. However, if we open the hot water line up only enough to have the water come out at full strength we can't get any cold water, only slightly warm water. We're not sure why this started happening. Again, this is the only faucet we have this trouble. Any ideas?


Follow-Up Postings:

 o
RE: Warm/cold Water Isuue

Some debris released by working on the clog could now be in the faucet assembly. That debris can defeat or damage the seals. I'd remove the faucet cartridge and check for debris and/or seal damage.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Plumbing Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here