|
| we are smack dab in the middle of a major kitchen, mudd and bathroom remodel. our current question relates to the mudd room, specifically the hoses from our FL washer unit to the wall where water supply and drain will be (see pics). I need help! where on the cabinet should we place a 3+ inch hole in the cabinet. the cabinet will be holding be a 22" W by a 9.5" Deep sink in a 24" cabinet the front loader washer and front loader dryer?
Concern#1: we are placing a sink in the cabinet that is 9.5 inches deep and 22 inches wide....will there be enough room for both hot and cold water hoses and drain hose not to get kinked? Concern#2: should the drain hose (where water leaves the pipe) be higher or lower as the water empties into the drain? any suggestions would be greatly appreciated. thanks https://picasaweb.google.com/118152884350973182660/20111024?authkey=Gv 1sRgCNm9k4StyYTxGA#5667268765980883282 https://picasaweb.google.com/118152884350973182660/20111024?authkey=Gv 1sRgCNm9k4StyYTxGA#5667268771020762258 https://picasaweb.google.com/118152884350973182660/20111024?authkey=Gv 1sRgCNm9k4StyYTxGA#5667268777656831714 https://picasaweb.google.com/118152884350973182660/20111024?authkey=Gv 1sRgCNm9k4StyYTxGA#5667268784770526850 |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.