|
Sun, Sep 23, 12 at 22:23
| Hello. In preparation for a kitchen upgrade, I wish to ask if a 72" long counter-depth beverage bar with bar sink (13" w x 8" h x 20" d) and old, broken 15" Scotsman ice maker might have the basic plumbing to allow a (second) DW placement in lieu of ice maker? I have a sink and faucet, I presume a separate ice maker drain, and I see a copper water line to the old Scotsman but no vent. Also, the raised floor sits above non-accessible slab. I do not want to tear everything up to install a waste vent if such is needed. Thank you for your insight and help. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.