Shop Products
Houzz Logo Print
daisysay

Drain Hole Issue! Unusual Problem

daisysay
10 years ago

Purchased new sink. The drain hole is too small for the standard size Delta faucet kit. Why wouldn't the sink have a standard size drain hole? What, if anything, can be done.. short of buying another sink?

Comments (6)

  • geoffrey_b
    10 years ago

    1 1/4" is the usual size. Your's looks like that.

  • _sophiewheeler
    10 years ago

    It's the right size. Just maybe defective in production, like it has a burr or something on it. Is it a china sink mounted to solid surface? Or is it solid surface? If it's the former, return it. Trying to fix it will probably break it. If it's the latter, then some sandpaper might fix the burr if it's not too bad.

  • daisysay
    Original Author
    10 years ago

    Appears to be all solid surface. White area is same material as countertop. Drain hole appears to be 1 1/2..Delta part 1 5/8. Is there a way to successfully enlarge drain hole?...Thx!

  • aidan_m
    10 years ago

    The sink is defective. Notice the little burr at 8 o'clock.

  • daisysay
    Original Author
    10 years ago

    Got a 1 1/4 inch pop up drain assembly. This solved the problem. Who knew they came in different sizes...Thanks for all info & suggestions!

  • Asanka Maduranga
    2 years ago

    I want konw how to make wood sink .how to making hole siz and please advice me

    If please give me engineerin drowning