|
Fri, Sep 2, 11 at 10:33
| Just a quick question, I have a unit 12-15 years old (not sure of the model #) the tanks are about 8" and 40 to 50" tall. How much fine mesh resin should I put in each tank? |
Follow-Up Postings:
|
- Posted by andy_c (awc222@yahoo.com) on Sat, Sep 3, 11 at 19:37
| 0.7 cuft per tank. Sanitize tank, and use only silicone based lubricants on o-rings |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.