|
Wed, Jul 20, 11 at 19:48
| I purchased a house recently (built late 2002-early 2003) that has radiant floor heating with zone control valves. The valves are Taco ESP075C2-1. The plumber whom I used to inspect the house said the most of the zone valves were broken and needed to be replaced.
The valves each have a plastic push button and on 4/6 I cannot push in the button, so it is probably true that they need to be replaced. My question is what are good valves to replace these Tacos? Plumber said Honeywell at cost of $90-100 each.
|
Follow-Up Postings:
|
- Posted by lazypup (lazypup@yahoo.com) on Sat, Jul 23, 11 at 6:37
| Tasco & Honeywell are both good valves and that price looks very reasonable |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Plumbing Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.